Xerox DocuPrint 180 Message Manual page 251

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
Insufficient disk space for image file <O/I error code: nB>
When reading an image from Raster Image Processor (RIP), a full
system disk condition occurred.
Action ActionPurge unnecessary files from the LPS and compress the
system disks to free contiguous space.
Note: In this message, the letter "B" indicates an octal value.
Invalid argument(s) value for operator:
<printingInstructionName>.
The Interpress master was incorrectly formatted and the identified
printing instruction has an invalid argument.
Action None.
Invalid element type: ENCODED VECTOR.
An error in an element of a printing instruction property vector was
detected.
Action None.
Malformed installed font; "fileType>localFontName" is an old
font; update.
The LPS font identified in the message is an old version and may not
be referenced via IPFNTS.JSL. Essentially, the font is a proportional
spaced font without a spacing table in the font header.
Action 1. Remove or replace reference to the font in IPFNTS.JSL
2. Recompile by entering the IFU IPFNTS command.
Master not well-formed; END not found.
The Interpress master was not created according to standard, and
the physical end of file was reached before the compilation's END
operator was encountered.
Action None.
No resources; graphic(s) exceed memory configuration.
The compressed IMG data for the page exceeded the amount of
memory available in the graphics option board (GVG or GHO).
Action None.
No resources; insufficient dynamic memory.
Virtual memory space was exhausted during Interpress master
processing and the job was aborted.
Action None.
SUMMARY SHEET ERROR MESSAGES
14-9