Xerox DocuPrint 180 Message Manual page 174

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-96
OS6709 DJDE processing error: SEF file not found.
The system cannot process your DJDE because the short-edge-feed
(SEF) mapping file requested is not present in the system.
Action Verify the SEF mapping file-name and reenter the DJDE.
OS6710 DJDE processing error: stockset file not found
A DJDE stockset called out within the job is not present on the
system disk.
1. Enter the correct stockset. (Refer to your Xerox DocuPrint 180
Action
LPS PDL Reference .)
2. For assistance, contact your systems specialist or Xerox
Customer Support.
OS6711 DJDE processing error: JDE not found.
The JDE invoked by the DJDE statement JDE = jde-id does not exist
in the selected JDL.
Action 1. Enter the CONTINUE I command to continue to process the
job. DJDE will be ignored.
or
Enter the ABORT I command to cancel the job.
2. Recode DJDE to reference a different JDE. (Refer to your
Xerox DocuPrint 180 LPS PDL Reference .)
3. Restart the job.
OS6712 DJDE processing error: JDL not found.
The JDL invoked by DJDE statement JDL = jdl-id does not exist on
the system disk.
Action 1. Enter the CONTINUE I command to continue to process the
job. DJDE will be ignored.
or
Enter the ABORT I command to cancel the job.
2. Recode DJDE to reference a different JDL. (Refer to your
Xerox DocuPrint 180 LPS PDL Reference .)
3. Restart the job.
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE