Xerox Customer Support Center - Xerox DocuPrint 180 Message Manual

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS6751 Insufficient dynamic memory for word processing link job.
Not enough dynamic memory was available for linked word
processing files. Linked files are processed up to the point where
memory was exhausted.
Action Resend files that were not processed.
OS6752 Insufficient dynamic memory for word processing merge job.
Not enough dynamic memory was available to process CWP
MERGE function. Job will abort.
Action 1. Remake job, reducing features.
2. Purchase additional memory capacity.
3. Resend job.
OS6754 Word processing merge job - switch codes missing.
During printing, a file was discovered to be incorrectly formatted, or
wrong switch code was entered in CCL MERGE command.
Action Resend job, correcting switch codes if necessary. (Refer to your
Xerox DocuPrint 180 LPS Reference Manua l, "Communications
interface" chapters.)
OS6755 Word processing merge job - no merge file.
There is no file name in XCS header for merge file.
Action Check your XCS file header packet.
OS6756 Word processing - document file I/O error.
Error has occurred in reading an .XCS file. Job cannot be processed.
Action 1. Resend job.
2. If message reappears, call Xerox Customer Support Center.
OS6757 Word processing - old XCS file - retransmit file.
Attempt was made to print a backup file containing a file header in an
obsolete format.
Action Resend job from workstation; do not use the old backup tape.
OS6758 Word processing file malformed. Retransmit file.
A start command was issued specifying an XCS file. The specified
file has an incorrect format.
Action Contact your systems specialist or Xerox Customer Support.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-101