Xerox DocuPrint 180 Message Manual page 55

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
IF2708 Syntax error: unexpected token x encountered
The character or symbol indicated in the message is incorrectly
included in the command line.
Action Reenter the command, omitting the incorrect character or symbol.
IF2709 Syntax error: literal exceeds x characters
The literal (an alphanumeric string not enclosed in single quotes)
exceeds the maximum number of allowable characters.
Action Reenter the command, using a literal with an allowable number of
characters.
IF2710 Syntax error: hex value is out of range
The command line contains a hexadecimal value that is not within the
allowable range.
Action Reenter the statement to include hex values that are within the
allowable range.
IF2711 Syntax error: invalid hex value
The command line contains an incorrect hexadecimal value.
Action Reenter the statement to include an acceptable hex value.
IF2712 Syntax error: unclosed string
A string (sequence of alphanumeric characters treated as a single
unit of data) must be enclosed in single quotes.
Action Reenter the command to include a string enclosed in single quotes.
IF2713 Syntax error: string exceeding x characters
The string exceeds the allowable numbers of characters.
Action Reenter the command to include a string with an allowable number
of characters.
IF2714 Syntax error: invalid character x has been encountered
The command line contains a character that is not allowed.
Action Reenter the command, using allowable characters.
IF2715 Syntax error: invalid command x has been encountered
The command requested is not allowed.
Action 1. Verify and reenter the command.
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
IFU (INTERPRESS FONT UTILITY) MESSAGES
5-17