Xerox DocuPrint 180 Message Manual page 99

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS1275 Command file suspended
The .PAUSE command was entered. Command file processing is
suspended for an unspecified period of time.
or
The .WAIT command was entered. Command file processing is
suspended until the current print job is completed.
Action None.
OS1276 Command file not suspended.
This message advises you that command file operations have not
stopped being processed.
Action None.
OS1278 Command file terminated
The .EXIT command was entered. Command file processing is
ended.
Action None.
OS1279 Command file error - label not found
An incorrect prefix was entered for the command file.
Action Reenter the statement correctly.
OS1280 Message file is not defined. Requesting ******;
message file: **;
OS1282 Message file does not exist. Requesting task: ******; Message
file: **;
The message file containing the message that should be displayed
for the indicated task does not exist on the system disk.
Action 1. Document circumstances of the message appearance.
2. Record any additional messages displayed in conjunction with
it.
3. Contact your systems specialist or Xerox Customer Service
with the above information.
Note: Messages OS1280 and OS1282 should not appear. If one of
these messages should occur:
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-21