Xerox DocuPrint 180 Message Manual page 177

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS6729 DJDE proc. error: Feed used but no stockset in effect.
The FEED command was used but a STOCKSET statement is not in
effect.
Action Reenter the DJDE command, specifying a STOCKSET. (Refer to
your Xerox DocuPrint 180 LPS PDL Reference , chapter 4, "Dynamic
Job Descriptor Entries.")
OS6731 File x processing aborted—data format error.
A required nonblank delimiting character is missing from a record in
the file being processed or was replaced by a different character in
some records. The part of the indicated file that has already been
copied will be deleted from disk. Its data will be printed out and not
copied to disk.
Action 1. Recreate the file, ensuring each record ends with the same
delimiter character. (Refer to your Xerox DocuPrint 180 LPS
Operations Reference chapter on LPS processing for additional
information.)
2. Resend the job.
OS6732 File x error—no card image data received.
"FILE" command specified "C" for card-image format. However, the
system encountered a DJDE record before any card-image records
were filed. The file will not be copied to disk.
Action 1. Recreate the tape, putting card image records in the correct
location. (Refer to your Xerox DocuPrint 180 LPS Operations
Reference chapter on LPS processing for additional
information.)
2. Resend the job.
OS6733 File x overflow—excess card image data lost.
The file indicated contains more card-images than specified in DJDE.
The extra card-images will not be copied to disk.
Action 1. Recode DJDE, specifying the correct number of card-images.
(Refer to your Xerox DocuPrint 180 LPS Operations Reference
chapter on LPS processing for additional information.)
2. Resend the job.
OS6734 File processing error—invalid destination file name.
The file being sent from the host has a file name improperly specified
(too many characters, etc.) in DJDE. The file will be printed and not
copied to disk.
Action 1. Recode DJDE, including the correct file name. (Refer to your
Xerox DocuPrint 180 LPS Operations Reference chapter on
LPS processing for additional information.)
2. Resend the job.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-99