Xerox DocuPrint 180 Message Manual page 154

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-76
OS3012 Paper Tray 3 fault -- see message at printer.
Feed tray 3 has not risen completely or a paper jam has occurred at
the area indicated on the printer control console display.
Action 1. Press the i button on the printer control console for further
console messages if the control console display instructs you to
do so.
2. Clear the jam in the area indicated if the display instructs you to
do so.
3. Ensure that the length guide is against the paper edge. (Refer
to the chapter on feeder trays in your Xerox DocuPrint 180 LPS
Operator Guide .)
4. Pull out feed tray 3, then push it all the way back in. The feed
tray should rise automatically.
5. If the feed tray does not rise, enter the FEED command to
switch to another feeder tray to complete the job.
6. If the problem continues, contact your systems specialist or
Xerox Customer Service.
OS3013 Paper Tray 4 fault -- see message at printer.
Feeder tray 4 has not risen completely or a paper jam has occurred
at the area indicated on the printer control console display.
Action 1. Press the i button on the printer control console for further
console messages if the control console display instructs you to
do so.
2. Clear the jam in area indicated if the display instructs you to do
so.
3. Ensure that the length guide is against the paper edge. (Refer
to the chapter on feeder trays in your Xerox DocuPrint 180 LPS
Operator Guide .)
4. Pull out feed tray 4, then push it all the way back in. The feed
tray should rise automatically.
5. If the feeder tray does not rise, enter the FEED command to
switch to another feed tray to complete the job.
6. If the problem continues, contact your systems specialist or
Xerox Customer Service.
OS3020 Finisher fault--see printer message.
A problem has occurred in the finishing option of the printer.
Action Refer to the printer control console display messages for instructions.
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE