Xerox DocuPrint 180 Message Manual page 175

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS6713 DJDE processing error: Font File not found.
OS6714 DJDE processing error: Form File not found.
OS6715 DJDE processing error: PDE File not found.
OS6716 DJDE processing error: Form Font not found.
OS6717 DJDE processing error: CME File not found.
OS6718 DJDE processing error: Invalid Font File header.
OS6719 DJDE processing error: Invalid Form File header.
The file specified by DJDE of the type indicated in the message was
not found on the system disk. Depending on JSL coding for handling
error conditions, one of the following occurs:
Error = Stop - Job is interrupted, and message "INPUT STOPPED,
ENTER CON I OR ABORT I" appears.
Error = Abort - Job automatically aborts.
Error = Continue - Printing continues and no further messages are
displayed.
Action 1. If Error = Stop, enter the CONTINUE I command to resume
input (DJDE is ignored) or ABORT I command to cancel the job.
2. If Error = Abort: Do one of following: Recode DJDE with a
different file name. (Refer to your Xerox DocuPrint 180 LPS
PDL Reference or your Xerox DocuPrint 180 LPS Operations
Referenc e chapter on using the editor for additional
information.) Load the desired file to disk.
3. Restart the job.
4. If Error = Continue and if the job prints unsatisfactorily, follow
instructions for ERROR = ABORT, above.
OS6720 OTEXT length exceeds limit...OTEXT ignored.
The operator message included in DJDE exceeds the maximum
length of 80 characters per page or 400 per report. The message will
not print.
Action 1. If desired, restate the OTEXT message, shortening it. (Refer to
your Xerox DocuPrint 180 LPS PDL Reference .)
2. Restart the job.
OS6721 DJDE processing error: invalid loadable PDE.
The PDE file loaded from magnetic tape has an incorrect format. The
job will not print correctly.
Action 1. Enter the ABORT command to cancel the job.
2. Recompile PDE correctly. (Refer to your Xerox DocuPrint 180
LPS PDL Reference .)
3. Reload the PDE file to the system disk. (Refer to your Xerox
DocuPrint 180 LPS PDL Reference .)
4. Restart the job.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-97