Xerox DocuPrint 180 Message Manual page 116

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-38
OS1825 Job queue has been flushed
The DRAIN command was entered. All data in queue has printed.
Action None.
OS1830 Printing 1 copy of current report
The "PRINT 1" option was selected in response to "Disk saturation"
message OS6300 or OS2871. Multiple-copy printing of the current
report has discontinued and the system is printing one copy.
Action None.
OS1835 Printing all copies of report in sections
The CONTINUE I command was entered in response to "Disk
saturation" message OS6300. The system is continuing multiple-
copy printing of current job by sections.
Action None.
OS1840 Printing all copies of report so far, ending job now
The ENDJOB command was entered in response to "disk saturation"
message OS6300. The system is printing the current report copy and
will stop printing the job when that copy is completed.
Action None.
OS1850 Job started at end of data, nothing found to print. Enter 'CON I'
or 'CON JDE,JDL' to start next report
No data exists for the job number entered. The job has already
printed, was not sent, or the tape was not rewound.
Action Press the Rewind button or enter the REWIND command to rewind
the tape.
or
Mount the desired job tape.
or
Send a job from the host.
OS1860 Endjob ignored, no data remains to be printed
The ENDJOB command was entered after printing was completed.
The command is being ignored.
Action None.
OS1910 This function of input not implemented
A command was entered relating to an input function not available on
your system
Action None.
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE