Checking The Status Of Consumables - Xerox WorkCentre 5020 System Administrator Manual

5 Machine Status
Status
Displays the status of the paper trays as [Ready], [Empty], [Not Available], or
[Unknown].
NOTE: The status of the paper tray may be displayed as [Unknown] if the machine is
in the Power Saver mode.
Paper Remaining
Displays the status of paper loaded in the paper trays as [Paper Loaded] or [No Paper].
Paper Size
Displays the size of paper loaded in each tray.
Priority
Displays the priority set for each tray when Automatic Tray Switching is enabled. The
highest priority is number 1. The greater the number, the lower the priority.

Checking the Status of Consumables

This section describes how to check the status of consumables.
The consumables menu displays the status of the Drum Cartridge and toner. The
status indicates when to replace the Drum Cartridge and to add toner to the Drum
Cartridge.
1.
Open your web browser, and enter the machine's IP address in the [Address] box
to access CentreWare Internet Services.
2.
Click the [Status] tab.
3.
On the collapsible menu of the Menu Panel, click [Consumables].
The [Consumables] page is displayed.
Consumables
Toner Cartridges
Displays the status of toner as [OK], [Reorder], [Replace], or [Fault].
NOTE: If [Replace] is displayed, add toner to the Drum Cartridge.
NOTE: Once toner is added to the Drum Cartridge, the status will be displayed as
[Ready].
Drum Cartridges
Displays the status of the Drum Cartridge as [OK], [Reorder], [Replace], or [Fault]. It
also displays the remaining drum life in percentages.
NOTE: If [Replace] is displayed, replace the Drum Cartridge.
38