Xerox WorkCentre 5020 System Administrator Manual page 88

9 Problem Solving
Error Code
What appears
What appears
in CentreWare
in the Display
Internet Services
n6
88
003-760 Incompatible features are
selected in the document scan
conditions.
016-701 An error occurred due to
insufficient memory for the PCL
decomposer.
016-702 A page compression error
occurred. The machine could
not compress any page due to
insufficient free space in the
buffer.
016-704 The mailboxes are full.
016-709 A report command error
occurred.
016-718 Unable to process PCL print
data due to insufficient memory.
016-719 Unable to process PCL print
data due to insufficient print
page buffer memory.
016-720 PCL print data contained a
command that could not be
processed.
016-721 An error occurred while printing
a job.
016-761 An image output error occurred.
116-720 An error occurred during printing
due to insufficient memory.
Description Remedy
Check the selected options.
Lower the resolution if possible.
Lower the resolution if possible.
Delete unnecessary documents
from the mailboxes, and then try
printing again.
Contact the Xerox Welcome
center.
Take one of the following actions:
• Lower the resolution.
• Do not use the Multiple-Up or
2 Sided Print feature, and try
printing again.
Take one of the following actions:
• Lower the resolution.
• Do not use the Multiple-Up or
2 Sided Print feature, and try
printing again.
Check the print data, and then try
printing again.
Contact the Xerox Welcome
Center.
Lower the resolution if possible.
Close unused ports or delete
unnecessary data.