Xerox WorkCentre 5020 System Administrator Manual page 27

8.
When you have finished establishing TCP/IP, press the <Log In/Out> button.
The machine exits the System Setting Mode.
NOTE: If you have changed any settings in the System Setting Mode, the machine will
reboot to register and enable the new settings. All scanned documents stored in
mailboxes will be deleted on the reboot.
NOTE: After the machine is rebooted, print a Configuration Report to confirm that the
the CentreWare Internet Services port is enabled and TCP/IP is correctly configured.
For information on how to print the Configuration Report, refer to
Configuration Report on page 41
NOTE: If you wish to use the IP Filtering feature, use CentreWare Internet Services to
register the IP addresses which are not allowed to access the machine. For more
information, refer to
TCP/IP Configuration
After accessing the CentreWare Internet Services home page, you can make detailed
settings for TCP/IP under [Connectivity] > [Protocols] > [TCP/IP] on the [Properties]
tab.
The following table shows the information fields and settings on the [TCP/IP] page.
General
Domain Name
.
IP Filtering (IP Address Restriction) on page 74
Feature
Protocol
Physical Connection
Host Name
IP Address Resolution
IP Address
Subnet Mask
Gateway Address
Domain Name
CentreWare Internet Services Installation
Setting Items
Displays "Enabled". This is a display-only
item.
Displays "Ethernet". This is a display-only
item.
Enter the host name.
Set the method for obtaining the IP address
from the drop down menu to access the
following options.
• STATIC: The user will specify all the
addresses.
• DHCP: The address will automatically be
set via DHCP.
• BOOTP: The address will automatically be
set via BOOTP.
• RARP: The address will automatically be
set via RARP.
• DHCP/Autonet: The address will be
automatically set by Autonet via DHCP.
Enter the IP address allocated to the machine
in the xxx.xxx.xxx.xxx format.
Enter the subnet mask in the xxx.xxx.xxx.xxx
format.
Enter the gateway address in the
xxx.xxx.xxx.xxx format.
Enter the domain name.
Printing the
.
27