Xerox WorkCentre 5020 System Administrator Manual page 110

10 Appendix
2.
Enter the System Administrator's ID
using a numeric keypad.
NOTE: The default System Administrator's
ID is "11111".
3.
Press the <Start> button to confirm the
entered ID.
The machine enters the System Setting
Mode. The letter [P] appears blinking in
the Display.
If Copy Auditron is enabled
1.
When Copy Auditron is enabled, [Id]
appears blinking in the Display. Enter
the System Administrator's ID using the
numeric keypad.
NOTE: The default System Administrator's
ID is "11111".
2.
Press the <Start> button to confirm the
entered ID.
• If the System Administrator's
passcode is not set, the machine
enters the Copy Mode, and [1]
appears in the Display.
Proceed to Step 5.
NOTE: By default, the System
Administrator's passcode is not set.
110
Numeric keys
<Start> button
<Start> button