Machine Information - Xerox WorkCentre 5020 System Administrator Manual

Machine Information

This section describes how to view general information about the machine, such as the
serial number, memory capacity, and available printer language. It also provides
information on how to change the machine settings, such as paper size table and
Power Saver feature.
1.
Open your web browser, and enter the machine's IP address in the [Address] box
to access CentreWare Internet Services.
2.
Click the [Properties] tab.
3.
On the collapsible menu of the Menu Panel, click [Description] or
the [General Setup] folder.
4.
Configure the required settings.
5.
Click [Apply].
6.
If prompted, enter the System Administrator user ID and passcode, and click [OK].
NOTE: By default, the System Administrator user ID is "11111" and its passcode is not
set.
The following table lists the items that can be set.
Description
Feature Setting items
Allows you to set and view information related to the
machine, such as the name and installation location of
the machine and the System Administrator's e-mail
address.
• Machine Model
Displays the model of your machine.
• Serial Number
Displays the serial number of the machine.
• Machine Name
Enter the name of the machine.
• Location
Enter the location of the machine.
• Contact Person
Enter the name of the System Administrator.
• Administrator's E-mail Address
Enter the e-mail address of the System
Administrator.
• Comment
Enter a comment on the machine.
Machine Information
39