Xerox WorkCentre 5020 System Administrator Manual page 80

9 Problem Solving
Error Code
What appears
What appears
in CentreWare
in the Display
Internet Services
C3
C5
80
002-910 The Bypass Tray has run out of
075-910 paper.
Paper is jammed in the Bypass
Tray.
024-950 Tray 1 has run out of paper.
024-959 Tray 1 has been selected in a
print job; however, the size/
orientation of paper that is
loaded in Tray 1 does not match
the paper size/orientation of the
print job.
Description Remedy
Load paper in Bypass Tray, and
press the <Start> button to
resume the job.
For information on how to load
paper in the Bypass Tray, refer to
the User Guide.
Remove the jammed paper.
Check that the paper guides are
adjusted correctly, and press the
<Start> button to resume the job.
For information on how to clear
paper jams in the Bypass Tray,
refer to C3: Paper Jam in the
Bypass Tray on page 100
Load paper in Tray 1.
For information on how to load
paper in Tray 1, refer to the User
Guide.
Load Tray 1 with the same sized
paper as specified in the print
job. Specify the correct size/
orientation of paper that is
loaded in Tray 1.
For information on how to reload
Tray 1 with a different sized
paper, refer to the User Guide.
For information on how to specify
the size and orientation of paper
that is loaded, refer to the User
Guide.
The error code may appear
again if the paper size specified
in the print job is A4, B5,
8.5 x 11", or 16K and the paper is
loaded in Tray 1 in the SEF
orientation. Reload the paper in
Tray 1 in the LEF orientation.
.