Xerox WorkCentre 5020 System Administrator Manual page 62

7 Scanner Environment Settings
Resolution
Reduce / Enlarge
Edge Erase
4.
Click [Apply].
62
Parameter
Preset %
Variable %
Top & Bottom
Left & Right
Value
Specify the scan resolution for the documents
to be scanned.
• [200 x 200 dpi] (Default)
• [300 x 300 dpi]
• [400 x 400 dpi]
• [600 x 600 dpi]
Select the preset enlargement/reduction ratio.
• [A3 A5/11x17 5.5x8.5(50.0%)]
• [B4 A5(57.7%)]
• [A3 B5(61.2%)]
• [11x17 8.5x11/8.5x11 5.5x8.5(64.7%)]
• [A3 A4/B4 B5(70.7%)]
• [8.5x14 8.5x11/A3 8.5x13(78.5%)]
• [B4 A4/B5 A5(81.6%)]
• [A3 B4/A4 B5(86.6%)]
• [A4 8.5x11/A3 11x17(94.0%)]
• [8.5x11 A4/11x17 A3(97.3%)]
• [100%] (Default)
• [B4 A3/B5 B4(115.4%)]
• [A4 B4/A5 B5(122.5%)]
• [8.5x13 A3(127.3%)]
• [5.5x8.5 8.5x11/8.5x11 11x17(129.4%)]
• [A4 A3/B5 B4(141.4%)]
• [5.5x8.5 8.5x14(154.5%)]
• [B5 A3(163.2%)]
• [A5 B4(173.2%)]
• [A5 A3/5.5x8.5 11x17(200%]
Specify a desired enlargement/reduction ratio.
The value can be specified within the range of
50 - 200% in 1% increments.
Allow you to erase unwanted marks from each
edge of scanned documents.
Set the top and bottom margins within the
range of 0 - 50 mm (0 - 2.0 inches)*.
(Default: 2mm/0.1 inches*)
*The measurement unit will depend on the
setting in [Unit Settings] on the [Properties]
tab.
Allow you to erase unwanted marks from each
edge of scanned documents.
Set the left and right margins within the range of
0 - 50 mm (0 - 2.0 inches)*.
(Default: 2mm/ 0.1 inches*)
*The measurement unit will depend on the
setting in [Unit Settings] on the [Properties]
tab.