10 Appendix; System Settings; Entering The System Setting Mode - Xerox WorkCentre 5020 System Administrator Manual

10 Appendix

This chapter provides the system settings menu list, machine specifications, optional
accessory list.
The following information is provided in this chapter:
System Settings – page 109
Specifications – page 122
Optional Accessories – page 125

System Settings

This section describes how to enter the System Setting Mode, and configure the
System Settings.
NOTE: If you have changed any settings in the System Setting Mode, the machine will
automatically reboot to register and enable the new settings. All scanned documents
stored in mailboxes will be deleted on the reboot.

Entering the System Setting Mode

The following describes how to enter the System Setting Mode.
Depending on whether Copy Auditron is enabled or disabled on the machine, the
procedure for entering the System Setting Mode differs.
For more information about Copy Auditron, refer to
page 65
If Copy Auditron is disabled
1.
Hold down the <Log In/Out> button for
four seconds.
Hyphens appear blinking in the Display.
.
Accounting and Securities on
<Log In/Out>
button
109