System Setting List - Xerox WorkCentre 5020 System Administrator Manual

System Setting List

Menu
Number
1 Machine Clock (Year)
2 Machine Clock (Month)
3 Machine Clock (Day)
4 Machine Clock (Hour)
5 Machine Clock (Minute)
6 Date Format
7 Time Format
11 Auto Clear Time
12 Transition Time to Low Power
Mode
13 Transition Time to Sleep Mode Specify the transition time before
Menu
Enter the current year with two
digits.
Enter the current month.
Enter the current day.
Enter the current hour.
Enter the current minute.
Specify the date format.
The date format set here is
printed on the Configuration
Report or is displayed in
CentreWare Internet Services.
NOTE: The default value depends
on the location where you
purchased the machine.
Specify the time format.
The time format set here is printed
on the Configuration Report or is
displayed in CentreWare Internet
Services.
NOTE: The default value depends
on the location where you
purchased the machine.
When the machine completes a
copy job, it clears features which
have been selected for that
particular copy job after a
specified period of time.
Select how long it takes for the
machine to clear the selected
copy features after a copy job has
been completed.
Specify the transition time before
the machine enters the Low
Power Mode from the last user
operation.
For more information on the Low
Power Mode, refer to the User
Guide.
the machine enters the Sleep
Mode from the last user
operation.
For more information on the Sleep
Mode, refer to the User Guide.
Description
System Settings
Value
00 - 99 (year)
1 - 12 (month)
1 - 31 (day)
0 - 23 (hour)
0 - 59 (minute)
1: 20yy/mm/dd
2: mm/dd/20yy
3: dd/mm/20yy
1: 12-hour format
2: 24-hour format
0: Disabled
1: 20 seconds
2: 30 seconds
3: 60 seconds*
4: 90 seconds
5 - 240 minutes
(Default: 5 minutes)
5 - 240 minutes
(Default: 10 minutes)
NOTE: You must specify a
longer time period for the
Sleep Mode than for the
Low Power Mode.
113