Test Access - Xerox WorkCentre 5020 System Administrator Manual

3 Using CentreWare Internet Services
DNS
Configuration
DHCP/DDNS
Zero-
Configuration
Networking

Test Access

Follow the steps below to access CentreWare Internet Services.
1.
At a client computer on the network, launch a web browser.
2.
In the URL field, enter "http://" followed by the Internet address of the machine.
Then press the <Enter> key on the keyboard.
If you use the domain name to specify the Internet address, use the following
format.
If you use the IP address to specify the Internet address, use the following format.
3.
Verify that the home page of CentreWare Internet Services is displayed.
The CentreWare Internet Services installation process is now completed.
If the test fails, refer to
on page 104
NOTE: If the Account Mode is enabled, you may be required to enter the user ID and
passcode (if one is set up). If you need assistance, contact the System Administrator.
28
Feature
Obtain DNS Server
Address Automatically
Preferred DNS Server
Alternate DNS Server
1 - 2
Dynamic DNS
Registration
Generate Domain Search
List Automatically
Domain Name 1 - 3
Connection Time-Out
Release Registration
Self Assigned Address
http://myhost.example.com
http://xxx.xxx.xxx.xxx
CentreWare Internet Services in the Problem Solving chapter
.
Setting Items
Allows you to enable or disable the automatic
setting of the DNS server address via DHCP.
Enter the IP address for the DNS domain
primary server.
Enter the IP addresses for the DNS domain
alternate server 1 and 2.
Specify whether to enable dynamic DNS
server updates and/or to overwrite DNS
settings upon updates.
Select whether or not to automatically
generate the domain search list.
Enter the domain names for the domain name
1 to 3.
Specify the maximum time period allowed for
searching domains.
Allows DHCP resources to be released when
the machine is powering down. This is a
display-only item and shows "Enabled".
Allocates an IP address without using a DHCP
server. This check box is selected when [IP
Address Resolution] is set to [DHCP/Autonet].
This is a display-only item.