Xerox WorkCentre 5020 System Administrator Manual page 16

2 Maintenance
The following procedure describes how to replace the Drum Cartridge.
1.
Make sure that the machine is not
processing a job, and then open the
Front Cover.
2.
Open the Left Side Cover.
3.
Lightly press the orange tab to unlock
the Drum Cartridge.
4.
Pull out the Drum Cartridge carefully.
NOTE: Do not touch the drum (blue roller)
when pulling out the Drum Cartridge.
5.
Take a new Drum Cartridge out of the
box, and remove the packaging.
6.
Insert the new Drum Cartridge halfway.
7.
Add toner.
For information on how to add toner, refer to
page 12
NOTE: A bottle of toner must be purchased separately when replacing the Drum
Cartridge.
8.
Push the Drum Cartridge in until it locks into position.
9.
Close the Left Side Cover and the Front Cover.
16
.
Adding Toner to the Drum Cartridge on