Error Code
What appears
What appears
in CentreWare
in the Display
Internet Services
C6
C7
024-951
Tray 2 has run out of paper.
024-960
Tray 2 has been selected in a
print job; however, the size/
orientation of paper that is
loaded in Tray 2 does not match
the paper size/orientation of the
print job.
024-958
The Bypass Tray has been
selected in a print job; however,
the size/orientation of paper that
is loaded in the Bypass Tray
does not match the paper size/
orientation of the print job.
Description
Fault Clearance Procedure
Remedy
Load paper in Tray 2.
For information on how to load
paper in Tray 2, refer to the User
Guide.
Load Tray 2 with the same sized
paper as specified in the print
job. Specify the correct size/
orientation of paper that is
loaded in Tray 2.
For information on how to reload
Tray 2 with a different sized
paper, refer to the User Guide.
For information on how to specify
the size and orientation of paper
that is loaded, refer to the User
Guide.
The error code may appear
again if the paper size specified
in the print job is A4, B5,
8.5 x 11", or 16K and the paper is
loaded in Tray 2 in the SEF
orientation. Reload the paper in
Tray 2 in the LEF orientation.
Load the Bypass Tray with the
same sized paper as specified in
the print job. Specify the correct
size/orientation of paper that is
loaded in the Bypass Tray.
For information on how to load
paper in the Bypass Tray, refer to
the User Guide.
For information on how to specify
the size and orientation of paper
that is loaded, refer to the User
Guide.
The error code may appear
again if the paper size specified
in the print job is A4, B5,
8.5 x 11", or 16K and the paper is
loaded in the Bypass Tray in the
SEF orientation. Reload the
paper in the Bypass Tray in the
LEF orientation.
81