Xerox WorkCentre 5020 System Administrator Manual page 95

Workcentre
Hide thumbs Also See for WorkCentre 5020:
Table of Contents

Advertisement

If the paper is jammed around the Fuser
1) Pull down the latches.
2) Remove the jammed paper.
NOTE: Do not leave any torn pieces of
paper inside the machine.
3) Return the latches back to their
4) Gently close the Left Side Cover.
If the paper is jammed inside the Left Side Cover
1) If the paper is jammed in the
2) If the paper is jammed in the
3) If the paper is jammed in the
NOTE: If the paper is still jammed tightly,
even after pulling up the green lever, open
Access Cover 1. This may release the
jammed paper, allowing you to remove it.
4) Gently close the Left Side Cover.
original position.
location shown in the diagram,
remove the jammed paper by
pulling it upwards.
location shown in the diagram,
remove the jammed paper by
pulling it upwards.
location shown in the diagram, and
if the edge of the jammed paper is
not accessible to be pulled out, pull
up the green lever, and remove the
jammed paper.
Paper Jams
95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5020dn

Table of Contents