Xerox WorkCentre 5020 System Administrator Manual page 114

10 Appendix
Menu
Number
14 <Scan Completed> Auto Clear
Time
21 Paper Size Table
22 Tray Priority for Automatic
Paper Selection
NOTE: This feature is
available only when the
machine is fitted with the
optional Paper Tray 2.
23 Odd Page 2 Sided
114
Menu
When the indicator next to the
<Scan Completed> button is
blinking during a copy or scan job,
and if the <Scan Completed>
button is not pressed for a
specified period of time to indicate
the last page of a document, the
current copy or scan batch
becomes the last in the job.
Specify the paper size table used
when the Document Feeder
detects standard sizes of
documents automatically.
NOTE: The default value depends
on the location where you
purchased the machine.
NOTE: Depending on the paper
size table the machine is
programmed to use, the
document sizes that can be
detected by the Document Feeder
change. Refer to
Detectable by the Document
Feeder on page 121
Specify the tray priority for
Automatic Paper Selection if there
is more than one tray that is
loaded with the same size and
same orientation of paper.
NOTE: The Bypass Tray is not
available.
For 2-sided printing, specify
whether to add a blank page to a
document that contains an odd
number of pages, so that the
document prints as an even
number of pages.
Description
Document Sizes
.
Value
0: Disabled
1: 20 seconds
2: 30 seconds
3: 60 seconds*
4: 90 seconds
Metric
0: A/B Series (8K/16K)
Inches
1: Inch Series (8.5 x 13")
2: Inch Series (8.5 x 13.4")
3: Inch Series
1: Tray 1*
2: Tray 2
0: Off *
1: On