Xerox WorkCentre 5020 System Administrator Manual page 50

6 Printer Environment Settings
8.
Configure required settings.
The following table shows the items that can be set.
SNMP
Configuration
SNMP
Configuration
> Edit SNMP
v1/v2c
Properties
SNMP
Configuration
> Advanced
SNMP
Configuration
9.
Click [Apply].
10.
If prompted, enter the System Administrator user ID and passcode, and click [OK].
50
Setting Items
SNMP Properties [Edit SNMP v1/v2c
Properties] button
[Advanced] button
Community Community Name
Names (Read Only)
Community Name
(Read/Write)
Default Trap TRAP Community
Community Name
Name
System System Administrator's
Administrator's Login ID
Login ID
Trap Destination Adresses
IP Trap IP Address
Destination
Address
UDP Port Number
SNMP Version
Traps TRAP Community
Name
Trap to be Received
Description
Displays the [SNMP
Configuration > Edit SNMP v1/
v2c Properties] page which
allows you to set the SNMP
v1/v2c properties.
Displays the [SNMP
Configuration > Advanced]
page that contains the [Add
UDP IP Address] and [Delete]
buttons.
Enter the community name
used for display.
Enter the community name
used for display and update.
Enter the trap notification
community name.
Enter the ID of the System
Administrator
Displays a page that contains
the [Add UDP IP Address] and
[Delete] buttons.
• [Add UDP IP Address]
button
This button displays the
[SNMP Configuration] page.
• [Delete] button
Selecting a trap on the
[SNMP Configuration >
Advanced] page and
clicking this button deletes
the trap. You can select and
delete multiple traps at
once.
Enter the IP address of the
SNMP agent that you are
setting up to receive traps.
Enter the UDP port number of
the SNMP agent.
Select the SNMP version of
the SNMP agent.
Enter the trap community
name of the SNMP agent.
Select the types of traps to
receive from the SNMP agent.