Problem Solving; Fault Clearance Procedure - Xerox WorkCentre 5020 System Administrator Manual

9 Problem Solving

This chapter describes what needs to be done when a problem occurs with the
machine. It provides information on how to troubleshoot a problem by referring to the
Machine Diagram (mimic), Error Code Label, and Troubleshooting Table. It also
explains how to identify network-related machine problems and how to clear paper
jams.
The following information is provided in this chapter:
Fault Clearance Procedure – page 75
Paper Jams – page 94
A1/A2: Document Jams – page 101
Network-related Problems – page 102
Xerox Welcome Center – page 107
Viewing/Editing Support Information – page 108

Fault Clearance Procedure

When a problem is encountered when using the machine, follow each step to identify
the cause of the problem, then apply the suggested solution.
• Machine Diagram (mimic)
If any indicator is lit or flashing, refer to
• Error code in the Display
Check the error code shown in the Display. Most error codes are listed on the Error
Code Label. Refer to the Error Code Label for the error description, and apply the
suggested solution.
If the displayed error code is not listed on the Error Code Label, refer to
on page 78
If an error occurs, the six-digit error code (***-***) is also displayed on CentreWare
Internet Services. For information on how to view the error history, refer to
Error Information on page 35
NOTE: You can also view the six-digit error code (***-***) in the Display on the Control
Panel. For more information, refer to
on page 35
• Troubleshooting Table
If any problem persists after applying the suggested solution, refer to
Troubleshooting Table on page 90
appropriate solutions.
• Assistance from the System Administrator
Alternatively, contact the System Administrator for assistance.
• Switching the machine on /off
In some cases, a problem can be solved by simply switching the machine off and
then on again. For information on how to switch the machine on and off, refer to the
User Guide.
.
.
.
Machine Diagram (mimic) on page 76
Viewing the six-digit error code at the machine
. Diagnose the symptom, then apply the
.
Error Codes
Checking
75