Xerox WorkCentre 5020 System Administrator Manual page 83

Error Code
What appears
What appears
in CentreWare
in the Display
Internet Services
E3
E4
E5
E6
E8
E9
072-101 Paper is jammed in or around
077-904 Tray 2.
072-105 Paper is jammed inside the Left
Side Cover.
077-300 The Front Cover is open.
077-301 The Left Side Cover is open.
077-305 The Access Cover 2 is open.
077-309 The Access Cover 1 is open.
003-500 When using the N-up feature,
the zoom ratio required to fit the
specified number of pages on a
sheet is outside the range of 50 -
200%.
003-501 When using the N-up feature,
there is a mismatch between the
orientation of the loaded
documents and the paper in a
tray.
003-502 There is a mismatch between
the orientation of the loaded
document and that of the paper
in a tray.
003-795 The zoom ratio required to fit the
image on the paper under the
specified settings is outside its
range of 50 - 200%.
Description
Fault Clearance Procedure
Remedy
Remove the jammed paper.
Check that the paper guides are
adjusted correctly.
For information on how to
remove the jammed paper in and
E3: Paper
around Tray 2, refer to
Jam in Tray 2 on page 99
For information on how to
correctly adjust the paper guides,
refer to the User Guide.
Remove the jammed paper.
For information on how to
remove the jammed paper, refer
E4: Paper Jam inside the Left
to
Side Cover on page 97
.
Close the Front Cover.
Close the Left Side Cover.
Close the Access Cover 2.
Close the Access Cover 1.
Press any button to clear the
error. Check the selected
options, and try again.
For information about the N-up
feature, refer to the User Guide.
Press any button to clear the
error. Check the selected
options, and try again.
For information about the N-up
feature, refer to the User Guide.
Press any button to clear the
error. Check the selected
options, and try again.
Press any button to clear the
error.
Take one of the following
actions:
• Press the <Variable Ratio>
button or the <Reduce/
Enlarge> button to specify the
zoom ratio within the range of
50 to 200%.
• Change the paper size.
For information on how to
change the size of paper in the
tray, refer to the User Guide.
.
83