Error Messages On Virtual Lcd - NEC N8100-1573F User Manual

8-12 Troubleshooting

Error Messages on Virtual LCD

NEC EXPRESSSCOPE Engine 2 (Remote Management Controller) on your server board allows
you to monitor the server status on the WEB browser.
The virtual LCD (16 digits x 2 lines) in the "Host Information" area displays the POST codes and
status message. When POST detects an error, the POST error code is displayed on the virtual LCD
upon completion of POST. See the table for POST error codes for details.
Example:
Message send from BIOS
Message send from BMC
Messages displayed on upper line (BIOS message)
On-screen message
XX BIOS Rev XXXX
Prepare To Boot
Mem Reconfigured
Mem Err Disable
CPU Reconfigured
Memory C-Err XX
Memory U-Err XX
PCI Bus SERR XX
PCI Bus PERR XX
Chipset Err XXXX
Description
POST in progress.
POST completes normally.
POST completes with memory degraded.
A correctable memory error frequently
occurred.
POST completes with processor
degraded.
A correctable error frequently occurs in
DIMM #XX.
An uncorrectable error has occurred in
DIMM #XX.
A SERR has occurred in the PCI bus XX.
A PERR has occurred in the PCI bus XX.
A chipset error occurred.
Virtual LCD
POWER ON
ATTENTION
Action
Wait until POST completes.
Wait until boot-up completes.
Contact your service
representative.
Status indicators