NEC N8100-1573F User Manual page 82

4-6 Configuring Your Server
Memory
To check the installed memory (DIMM board) status
Select [Advanced] - [Memory Configuration] - [DIMM #n Status], and check the status
indications (n: 1, 2, 3, or 4).
The on-screen DIMM group numbers and socket locations on the mother board are
associated as shown in the following figure.
DIMM #1
DIMM #2
DIMM number
DIMM #1
DIMM #2
DIMM #3
DIMM #4
To clear the memory (DIMM board) error information
Select [Advanced] - [Memory Configuration] - [Memory Retest] - [Yes] and reboot.
The on-screen DIMM group numbers and socket locations on the mother board are
associated as shown in the following figure.
CPU
To check the installed CPU status
Select [Main] - [Processor Settings] and check the status indications.
To clear the CPU error information
Select [Main] - [Processor Settings] - [Processor Retest] – [Yes] and reboot.
The on-screen CPU numbers and socket locations on the mother board are associated as
shown in the above figure.
Socket number
DIMM 1
DIMM 2
DIMM 3
DIMM 4
Installation order
First
Second
Third
Fourth
DIMM #3
DIMM #4
CPU