NEC N8100-1573F User Manual page 101

Configuring Your Server 4-25
Exit
The options on the menu are described below.
Exit Saving Changes
Select this item to exit from SETUP after saving the newly selected information in CMOS
(nonvolatile memory). Selecting "Exit Saving Changes" causes the confirmation screen to appear. If
you select "Yes", SETUP is quitted with the newly selected information saved in CMOS
(nonvolatile memory). Then the server automatically reboots the system.
Exit Discarding Changes
Select this item to exit from SETUP without saving the newly selected information in CMOS
(nonvolatile memory). When the confirmation message "Save before exiting?" appears, select "No"
to quit SETUP without storage of the modified information. Then the server proceeds to Boot menu.
Selecting "Yes" allows SETUP to be quitted with storage of the modified information. Then the
server automatically reboots the system.
Load Setup Defaults
Select this item to return all the values of SETUP to the default values. Selecting "Load Setup
Defaults" causes the confirmation screen to appear. Select "Yes" to return the values to the default
values. Select "No" to return to the Exit menu screen.
Load Custom Defaults
Select this item and press Enter to load the custom defaults stored. This menu does not appear if
the Custom Defaults are not saved.
Save Custom Defaults
Select this item and press Enter to save the parameters currently being edited as custom defaults.
When the parameters are saved, the Load Custom Defaults menu appears.
Discard Changes
Select this item to return the values modified currently to the previous values before saving the
values to CMOS. Select "Yes" to discard the newly selected information and return to the previous
values.
Save Changes
Select this item to save the newly selected information to CMOS (non-volatile memory) without
quitting the SETUP. Selecting "Save Changes" causes the confirmation screen to appear. Select
"Yes" to save the newly selected information to CMOS (non-volatile memory)