NEC N8100-1573F User Manual page 60

3-10 Setting Up Your Server
Installing Inner Rail (on both sides)
NOTE:
Inner Rail (on one side).
Removal of inner rail
From the side marked with "F", slowly remove the inner rail while pressing the unlock
button.
The figure shows the right side of rail assembly. Remove the inner rail from left side in
the same manner.
IMPORTANT:
The removed rail assemblies are to be installed on the inner rails
later.
Be very careful not to get your finger caught in the levers or rails.
To install the inner rails on one side of the rack, see "Installing
Press this button to
unlock the inner rail.
Inner rail
Rail assembly
Marking "F"
Rail
assembly