NEC N8100-1573F User Manual page 268

9-12 Upgrading Your Server
2.5-inch Hard Disk Drive
1.
Locate the slot in which you are going to install a hard disk drive.
The server has four slots.
IMPORTANT:
The slot numbers are assigned as shown below.
2.
Unlock the hard disk drive, and open the handle.
3.
Firmly hold the hard disk drive and handle, and insert them into the slot.
4.
Close the handle slowly.
Make sure that the hook below the lever of hard disk drive is engaged with the frame.
Slot 0 Slot 2
Slot 1 Slot 3