Graphics Accelerator Driver; Setting For Solving Problems - NEC N8100-1573F User Manual

Installing the Operating System with Express Setup 5-29

Graphics Accelerator Driver

If you use standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
Please refer to "Graphics Accelerator Driver" described in Appendix D-25 when you want to
reinstall the driver individually.
Installing SCSI Controller Driver (N8103-107)
If you use the SCSI Controller N8103-107, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing SAS Controller Driver (N8103-104A)
If you use the SAS Controller N8103-104A, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing Fibre Channel Controller Driver (N8190-127/131)
If you use the Fibre Channel Controller N8190-127/131, you do not need to install the driver
manually. It is automatically installed by Windows Plug-and-Play.

Setting for Solving Problems

Setup your computer in advance so that it can recover from any trouble precisely and as soon as
possible when it should occur.
For more information, refer to Page 5-54.