Error Messages On Virtual Lcd - NEC Express5800/R140a-4 User Manual

Error Messages on Virtual LCD

On the Web browser of EXPRESSSCOPE Engine 2 (BMC), you can view the error messages on
virtual LCD. The following table lists error messages displayed on upper and lower lines and
actions to take.
On-screen error messages related to devices such as processor, memory, and fans and installation
locations are associated as shown in the figure on pages 8-24 to 8-28.
Refer to the EXPRESSSCOPE Engine 2 User's Guide for details of virtual LCD.
Example:
Message sent from BIOS
Message sent from BMC
Messages displayed on upper line (BIOS Message)
When STATUS lamp is lighting in green
On-screen
message
Prepare To Boot
Description
POST completes normally.
Virtual LCD
POWER ON
ATTENTION
Action
This is not an error.
Troubleshooting 8-31
Status indicators