Error Messages On Virtual Lcd - NEC N8100-1410F User Manual

Error Messages on Virtual LCD

NEC EXPRESSSCOPE Engine 2 (Remote Management Controller) on your server board allows
you to monitor the server status on the WEB browser-based screen of the client PC via network.
The virtual LCD (16 digits x 2 lines) in the "Host Information" area displays the POST codes and
status message.
When POST detects an error, the POST error code is displayed on the virtual LCD upon completion
of POST. See the table for POST error codes for details.
Example:
Message send from BIOS
Message send from BMC
Messages displayed on upper line (BIOS message)
On-screen message
XX BIOS Rev YYYY
CPU Reconfigured
Mem Reconfigured
Description
POST in progress.
XX: POST code, YYYY: BIOS version
POST completes with processor
degraded.
POST completes with memory
degraded.
Virtual LCD
POWER ON
ATTENTION
Action
This is not an error.
Contact your service
representative.
Try the following steps to cancel
the error.
1. Start BIOS SETUP.
2. Select [Main] - Processor
Settings] - [Processor Retest] -
[Yes].
3. Select [Exit] - [Exit Saving
Changes].
Contact your service
representative.
Try the following steps to cancel
the error.
1. Start BIOS SETUP.
2. Select [Advanced] - [Memory
Configuration] - [Memory
Retest] - [Yes].
3. Select [Exit] - [Exit Saving
Changes].
Troubleshooting 8-9
Status indicators