NEC N8100-1573F User Manual page 75

Setting Up Your Server 3-25
IMPORTANT:
Power off the server and a peripheral device before connection.
Connecting a powered peripheral device to the powered server will
cause malfunctions and failures.
To connect a third-party peripheral device or interface cable to the
server, consult with your service representative for availability of
such a device or cable. Some third-party devices may not be used
for the server.
Power control through the serial port is unavailable on this server.
Do not connect the serial ports with the telephone line directly.
Bundle the cables by using cable tie or the like so that they are not
entangled.
Form the cables in such a way that they will not come into contact
with the rack door or the guide rails on the sides of the server.
When removing the LAN cable, pull it horizontally. Otherwise,
connector may be disturbed.