NEC N8100-1573F User Manual page 334

D-30 Installing Windows Server 2008
For a server running a Server Core installation
1.
At the command prompt, type Slmgr –dli, and press Enter.
IMPORTANT:
already been activated on your system. Click
2.
Type slmgr –ipk <PID>, and press Enter.
* PID is your product key on the COA label.
3.
Type slmgr –dti to obtain an installation ID for Windows activation, and press Enter.
4.
See "%systemroot%\system32\slui\phone.inf" for the phone number of the Microsoft
customer service.
5.
Call the above number, inform the representative of the installation ID which you
obtained in step 3, and receive a confirmation ID.
If the following message appears, Windows has
to exit.