NEC N8100-1573F User Manual page 235

Messages displayed on lower line (BMC message)
On-screen message
ProcVcore Alm XX
BB P_Vtt Alm XX
BB +1.5v Alm XX
BB +1.8v Alm XX
BB +1.2vs Alm XX
BB +3.3v Alm XX
BB +5.0v Alm XX
BB +5vs Alm XX
BB +12v Alm XX
VBAT Alm XX
BB Temp Alm 00
BB Temp Alm 02
BB Temp Alm 07
BB Temp Alm 09
Amb Temp Alm 00
Amb Temp Alm 02
Amb Temp Alm 07
Amb Temp Alm 09
CPU Temp Alm 00
CPU Temp Alm 02
CPU Temp Alm 07
CPU Temp Alm 09
DUMP Request !
OS shutdown Alm
Power On Cnt Alm
240VA Power Down
Processor T-Trip
Processor IERR
SMI timeout
WDT timeout
System Fan 1 Alarm
System Fan 2 Alarm
System Fan 3 Alarm
HDD 0 Fault
HDD 1 Fault
HDD 2 Fault
HDD 3 Fault
Description
Voltage alarm occurred
XX=09: high voltage (alarm)
XX=07: high voltage (warning)
XX=02: low voltage (alarm)
XX=00: low voltage (warning)
A low temperature warning is detected.
A low temperature alarm is detected.
A high temperature warning is detected.
A high temperature alarm is detected.
A low temperature warning is detected.
A low temperature alarm is detected.
A high temperature warning is detected.
A high temperature alarm is detected.
A low temperature warning in CPU is
detected.
A low temperature alarm in CPU is
detected.
A high temperature warning in CPU is
detected.
A high temperature alarm in CPU is
detected.
Dump switch is pressed.
OS stop error occurred.
Power supply failure occurred.
Thermal Trip occurred on processor. The
system is forcibly turned off.
IERR occurred on processor.
SMI timeout occurred.
Watchdog timer timeout error occurred.
A fan alarm occurred.
A hard disk drive error occurred.
Troubleshooting 8-13
Action
Contact your service
representative.
Fan may be faulty or clogged
with dust.
Contact your service
representative.
Wait for completion of memory
dump collection.
Take note of on-screen message,
wait for completion of memory
dump collection, then contact
your service representative.
Contact your service
representative.
Contact your service
representative.
Fan may be faulty or clogged
with dust. Contact your service
representative.
1. Check if the hard disk drives
are properly installed.
2. Replace the failed hard disk
drive and perform rebuilding.
3. If the same error occurs,
contact your service
representative.