NEC N8100-1573F User Manual page 267

3.
Install the hard disk drive in the drive carrier, and secure it with screws provided with the
server.
NOTE:
Use the screws for securing hard disk drive provided with the
server. Keep one screw as a spare.
4.
Insert the drive carrier into the server chassis straight, and secure it with two screws.
5.
Power on the server, and run SETUP utility.
Select [Boot] menu to set the boot priority. When you have installed hard disk drive
additionally, the boot priority stored in BIOS is cleared. See Chapter 4 for details.
Screw
Screw
Upgrading Your Server 9-11