NEC N8100-1573F User Manual page 95

Option
AC-LINK
Power ON Delay
Time (Sec)
Platform Event
Filtering
The table below shows the operation when the AC power to the server is turned off once and then
on again, depending on the setting of "AC LINK".
System status before AC power off
Operating
Aborting (DC power being off also)
Forced shutdown
* Press the power switch continuously for four seconds or longer. This forcibly turns off the power.
IMPORTANT:
Power Supply), select [Server] - [AC LINK] - [Power On].
Parameter
Stay Off
[Last State]
Power On
[20] - 255
Disabled
[Enabled]
To power on the server from the UPS (Uninterruptible
Description
Specify the state of power when the
AC power to the server is turn off
once and then on. See the table
below for details.
Specify the power on delay time
within the range between 20 and
255 seconds. The time specified is
valid when "Power On" or "Last
State" is specified for AC LINK.
Specify whether to enable or disable
the platform event filtering (PEF)
feature.
Setting of AC LINK
Stay Off Last State
Off On
Off Off
Off Off
Configuring Your Server 4-19
Your Setting
[ ]: Factory-set
Power On
On
On
On