Graphics Accelerator Driver; Installing Scsi Controller Driver (N8103-107; Installing Sas Controller Driver (N8103-104A - NEC N8100-1573F User Manual

E-26 Installing Windows Server 2003 x64 Editions

Graphics Accelerator Driver

If you utilize standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
Please follow the following procedure when you want to reinstall the driver individually.
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.
If the autorun menu is displayed, close menu screen.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "Install.bat" in the following directory.
\008\win\winnt\w2k3amd\video\install.bat
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER DVD from the optical disk drive, restart the
system.

Installing SCSI Controller Driver (N8103-107)

If you use the SCSI Controller N8103-107, update your system with NEC EXPRESSBUILDER
DVD attached to your system.
The SCSI Controller driver will be installed automatically.

Installing SAS Controller Driver (N8103-104A)

If you use the SAS Controller N8103-104A, update your system with NEC EXPRESSBUILDER
DVD attached to your system.
The SAS Controller driver will be installed automatically.