NEC N8100-1573F User Manual page 276

9-20 Upgrading Your Server
Installation
Take the following steps to install a PCI board on the riser card:
IMPORTANT: To install a PCI board, you need an optional N8116-20
PCI riser card (PCI Express (x8)).
NOTES:
Optional riser card (PCI Express (x8)) supports low-profile PCI
board only. Before installing a PCI board, confirm the type of the
PCI board.
When installing a PCI board, confirm that the card connector
matches the connector of the riser card.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Pull out the server from the rack.
3.
Remove the top cover.
4.
Remove the riser card bracket.
Riser card bracket