Problems With Express Setup - NEC N8100-1573F User Manual

Problems with Express Setup

Specified to join the Domain, but the system is installed as Workgroup.
When the setup fails to join the Domain during the installation, it will install the
→
system as Workgroup. Open [System] in Control Panel to specify joining the
Domain.
Unable to specify the details of Network adapter.
In Express Setup, you can not specify the details of Network adapter. Specify
→
them from Control Panel after starting Windows.
There is unused area on the lead of HDD:
Did you install Windows Server 2003?
If you had installed Windows Server 2003 by Express Setup, the head 8MB of
→
HDD may be unused area.
It is not a problem in operating the system.
Product key was not asked:
Case of Windows Server 2008
If you install using BackUp DVD-ROM, product key is not required.
→
If you install using the DVD-ROM other than BackUp DVD-ROM, product key
screen is displayed twice, at "during OS installation" and "before [MICROSOFT
SOFTWARE LICENSE TERMS] dialog, which displayed after OS installation".
Enter product key following the message.
Case of Windows Server 2003
If you install using BackUp CD-ROM, product key is not required.
→
If you install using the DVD-ROM other than BackUp DVD-ROM, product key
screen is displayed during OS installation.
Enter Product Key following the message.
When IIS is installed with Windows Server 2008 by Express Setup, following feature
is installed:
Windows Process Activation Service
– Process Model
– Configuration APIs
Remote Server Administration Tool
– Role Administration Tools
– Web Server (IIS) Tools
The feature listed above is activated because they are required for the installation
→
of IIS basic feature.
Troubleshooting 8-27