NEC N8100-1573F User Manual page 94

4-18 Configuring Your Server
Server
Option
Assert NMI on
PERR
Assert NMI on
SERR
FRB-2 Policy
Boot Monitoring
Boot Monitoring
Policy
Thermal Sensor
BMC IRQ
Post Error Pause
Parameter
Disabled
[Enabled]
Disabled
[Enabled]
Disable FRB2 Timer
Disable BSP
Do Not Disable BSP
[Retry 3 Times]
[Disabled]
5 Minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
[Retry 3 Times]
Always Reset
Disabled
[Enabled]
Disabled
[IRQ 11]
Disabled
[Enabled]
Description
Specify whether to support PCI
PERR or not.
Specify whether to support PCI
SERR or not.
Specify the operation of processor
when FRB level 2 error occurred in
BSP.
Specify whether to enable or disable
the boot monitoring function on
booting, or select the time limit for
timeout.
To use this function, install NEC
ESMPRO Agent. Set this item to
"Disabled" if the system is booted
from OS without installation of NEC
ESMPRO Agent.
Specify the processing at the
occurrence of timeout during boot
monitoring.
If [Retry 3 times] is selected, the
system is reset after the occurrence
of timeout and OS boot is retried up
to three times.
If [Always Reset] is selected, the
system is reset after the occurrence
of timeout and OS boot is retried
repeatedly.
* If no service partition exists in the
system, OS boot is retried
repeatedly from the system
partition.
Specify whether to enable or disable
the thermal sensor monitoring
function. If a thermal error is
detected with this item being set to
"Enabled", the system stops at the
end of POST.
Specify whether to assign IRQ for
BMC.
Specify whether to stop the POST
once at the end of POST if an error
occurs during the POST.
Your Setting