Using Custom-Size Media; How Do I Use Custom-Size Media - MINOLTA-QMS magicolor 2350 User Manual

4
Slide the tray back into the printer.
If you have removed the tray from
the printer, tilt the tray slightly to
align it with the rails in the printer.
5
Using the printer's control panel or
PageScope Light, set the media size
for letter or A4, whichever matches
your Tray 2.
6
In the printer driver, set the media
mode to Plain Paper.
7
Then print the job.

Using Custom-Size Media

When you use media that is not a standard size (see "What types and sizes
of media can I load?" on page 23), you need to configure the printer for the
custom size. Otherwise, your print job may be cut short or misaligned on the
page.
To make custom page sizes work correctly, you need to change the printer's
default settings at the control panel or in PageScope Light and also in the
MINOLTA-QMS printer driver.
Default page sizes are set in inches on 110V printers and in millimeters on
220V printers.
When you set custom page sizes in inches (110V printers), the two digits on
the right are always decimal places. For example, set 8.5 inches as 850.
When you set custom pages sizes in millimeters (220V printers), there are
no decimal places. For example, set 78.2 millimeters as 78.
The more accurate your measurements, the better your print job is
aligned.
Control Panel
Use the Paper/Input Tray/Custom menu to reach the width and length
settings for custom-size media. Then enter the width and length of the media
you are using.
PageScope Light
Use the web-based utility's Configuration/Paper Handling options to set the
custom size.
Using Custom-Size Media
37