Additional Assistance - MINOLTA-QMS magicolor 2350 User Manual

This service
message...
SERVICE CALL 08
MAIN MOTOR
SERVICE CALL 10
LASER UNIT
SERVICE CALL 12
LASER UNIT
SERVICE CALL 14
XFER ROLLER
SERVICE CALL 15
XFER BELT
SERVICE CALL 16
XFER BELT
SERVICE CALL 17
TONER RACK
SERVICE CALL 18
FUSER UNIT
SERVICE CALL 19
FUSER UNIT
SERVICE CALL 21
TRANS DET SENS
SERVICE CALL 29
MEM MALF COUNTER
FIRMWARE UPDATE
WRITING ERROR
NETWORK ERROR
(TYPE)

Additional Assistance

If you've followed all of the instructions in this guide and still have problems
you can't solve, check our Answer Base at www.minolta-qms.com/support for
a solution.
You can also refer to the Service & Support Guide or visit our web site at
www.minolta-qms.com for current information on getting help.
146
means...
The printer motor
requires service.
The polygon motor
requires service.
The laser unit requires
service.
The transfer roller
requires service.
The transfer belt
requires service.
The toner carousel
requires service.
The fuser unit requires
service.
The transfer detection
sensor requires service.
The engine memory has
malfunctioned.
The FLASH memory is
malfunctioning and
needs to be replaced.
A fatal error has
occurred.
do this...
Contact your vendor
with the error
information. If you
cannot get service from
your vendor, see the
Service & Support
Guide or
www.minolta-qms.com
for support contact
information.
Additional Assistance