Ordering Consumables - MINOLTA-QMS magicolor 2350 User Manual

6
Turn the release lever of the transfer
belt counterclockwise to its correct
position (7 o'clock).
This lowers the transfer belt.
Attention
If the transfer belt release lever is not at its correct position
(7 o'clock), the waste toner bottle cannot be installed.
7
Install a new waste toner bottle (see page 91).
The printer must complete a 305-second calibration cycle after any
consumable has been replaced. If you open the door before the
message window reads MAGICOLOR 2350/IDLE, the printer
stops and repeats the calibration cycle.

Ordering Consumables

Choosing the right consumables for your printer not only increases its
reliability and performance, but also minimizes the risk of damage. For
example, only MINOLTA-QMS toner cartridges are designed to meet the
exact specifications of your MINOLTA-QMS printer, giving maximum
performance, efficiency, and long life.
Toner cartridges and other consumables for your printer are available from
your local vendor or Q-SHOP (www.q-shop.com).
See the Service & Support Guide for sources of service and support. The
most up-to-date worldwide information can be found at
www.minolta-qms.com.
100 Ordering Consumables