Power Requirements - MINOLTA-QMS magicolor 2350 User Manual

Power Requirements

WARNING!
Connect the power plug to an outlet with the same rated voltage as the
printer. No other devices should be connected to this outlet, as
overheating could cause fire or electric shock. The printer draws 13 A at
100V, 11 A at 120 V, or 7 A at 220-240 V. Your printer requires a properly
grounded AC outlet. The grounding terminal on the power cable should
be connected to a good earth ground to prevent electric shock and fire.
In compliance with UL guidelines, "The appliance inlet is considered to
be the main disconnect device."
Input Power
Voltage
Fluctuation
Rate and Rated
Line Voltage
Frequency
Variation Rate
Maximum
Electrical
Current
Noise-
generating
Equipment
Grounding
182
North America 120 VAC; 50/60 Hz ±3%
Europe 220–240 VAC; 50/60 Hz ±3%
Latin America 115/120 VAC 50/60 Hz ±3%
220–240 VAC 50/60 Hz ±3%
Notes: Amperage capacity at least 1.2 times that used by
the printer.
North America 120 VAC ±10%
Europe 220–240 VAC ±10%
Latin America 120 VAC ±10%
220–240 VAC ±10%
Notes: 10% of the rated line voltage for proper operation.
Within 50–60 ±3 Hz
Required during operation is 13 amps for a 100 V, 11 amps
for a 120 V system and 7 amps for a 220–240 V system.
Should not be connected to the same electrical outlet as
the printer.
Your printer requires a properly grounded AC outlet.
Interface Panel