MINOLTA-QMS magicolor 2350 User Manual page 101

1
Remove the new OPC drum cartridge
from its carton.
Attention
Keep the protective sheet on the cartridge. Do not touch the
protective sheet on the photosensitive (green) surface or scratch the
surface. This could lower image quality.
Make sure the transfer belt release lever is still set to its top position
(11 o'clock).
2
Holding the OPC drum cartridge
level, place the front end of the OPC
drum cartridge installation guide into
the installation rail.
3
Carefully push the OPC drum
cartridge in.
When installing the OPC drum
cartridge, be sure not to press on the
release lever. If the lever is pressed
during installation, the lock is
released, and the cartridge is not installed correctly.
Attention
The cartridge should slide easily into the printer. Don't force it.
4
Press on the front handle of the OPC
drum cartridge with one hand and
hold the front handle of the OPC
protective cover with the other hand.
5
Peel the protective cover off (straight
toward you).
Dispose of it properly
according to your local
regulations.
Replacing Consumables
99