Installing The Lower Feeder Unit - MINOLTA-QMS magicolor 2350 User Manual

Installing the Lower Feeder Unit

Attention
Since consumables are installed in the printer, be sure to keep the
printer level when moving it in order to prevent accidental spills.
1
Turn off the printer, and unplug the
power cord and interface cable.
2
Remove the media support from
Tray 1.
Lift the support slightly and snap it
gently out of the printer.
3
Remove the lower feeder unit from
the shipping carton, and place it on a table or flat surface near the printer.
4
Remove any tape and packing
material from the lower feeder unit.
We strongly suggest that you
save the packing materials in
case you ever need to move
or ship the printer.
Optional Lower Feeder Unit and Tray 2
157