Installing Accessories; Introduction - MINOLTA-QMS magicolor 2350 User Manual

Introduction

Attention
It's very important to protect the printer controller board and any
associated daughterboard or module from electrostatic damage while
performing any task involving the controller board.
Attention
Use of accessories not manufactured/supported by MINOLTA-QMS is
not supported by your printer and will void your warranty.
This chapter provides information about the following accessories. Contact
your local vendor or www.minolta-qms.com for compatibility and purchase
information.
Dual In-Line Memory
Modules (DIMMs)
Duplex Option
Lower Feeder Unit
Internal Hard Disk Kit 6 GB or larger hard disk and daughterboard
Internal Hard Disk
Daughterboard Kit
These accessories are also supported. Check www.minolta-qms.com for
information about additional accessories.
Buzzbox
Wireless Interface
Network Option
Convenience Copier SC-215 via parallel port
Attention
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
148
64, 128, or 256 MB PC-100- or PC-133-Compliant
SDRAM DIMM, up to a maximum of 384 MB.
Automatic duplexing
500-sheet media tray included
Daughterboard for installing internal hard disk
Via parallel port (US only)
802.11b or Bluetooth via parallel port
Token-Ring via external connection
Introduction